Starck Oil
Extreme
(FULLY SYNTHETIC MOTOR OILS)
FORTE TURBO STARCK EXTREME fully synthetic motor oils are manufactured from 100% synthetic base stocks and high quality additives to achieve higher performance levels than both synthetic technology and mineral oils. To these high-quality synthetic base oils, we add our exclusive Forte Protection to create a motor oil that helps provide superior cleansing and protection for today’s engines.
Fully synthetic motor oils help protect your engine.
It is not just freezing Arctic conditions or blistering deserts that push oil to extremes. Everyday motorway driving or congested city traffic, where the car repeatedly has to start and stop, can mean severe conditions for engine oil. FORTE TURBO STARCK Extreme fully synthetic motor oil formulation offers FORTE TURBO’s maximum protection with Forte Protection in very hot and extremely cold climates, and severe driving conditions.
0W‐20
API SN; ILSAC GF-5
FOR GASOLINE ENGINES
Specifications
- Unsurpassed sludge protection – motor oil that can keep your engine closer to factory clean
- Low viscosity and low friction characteristics for up to 2.2% greater fuel economy
- No loss of engine power or fuel economy even after 100,000 km
- Easier cold starting
- Based on Sequence VG sludge test results using 0W-40
- Based on data from a field test of 100,000-km duration
- Compared with higher-viscosity oils
0W‐30
API SL/CF; ACEA A3/B3, A3/B4
MULTI GRADE OIL FOR DIESEL AND GASOLINE ENGINES
Specifications
- Unsurpassed sludge protection – motor oil that can keep your engine closer to factory clean
- Low viscosity and low friction characteristics for up to 2.2% greater fuel economy
- No loss of engine power or fuel economy even after 100,000 km
- Easier cold starting
For gasoline, diesel and gas engines; also suitable for biodiesel and gasoline/ethanol blends
- Based on Sequence VG sludge test results using 0W-40
- Based on data from a field test of 100,000-km duration
- Compared with higher-viscosity oils
0W‐40
API SN/CF; ACEA A3/B3, A3/B4
MULTI GRADE OIL FOR DIESEL AND GASOLINE ENGINES
Specifications
- Unsurpassed sludge protection – motor oil that can keep your
engine closer to factory clean - Low viscosity and low friction characteristics for up to 1.9% greater fuel economy
- Superior wear and corrosion protection
- Easier cold starting
For gasoline, diesel and gas engines; also suitable for biodiesel and gasoline/ethanol blends
- Based on Sequence VG sludge test results using 0W-40
- Compared with API SN specification, tests carried out at an independent laboratory
- Compared with higher-viscosity oils
5W‐20
API SN, ILSAC GF-5, ACEA C5
FOR GASOLINE ENGINES
Specifications
- Unsurpassed sludge protection – motor oil that can keep your engine closer to factory clean
- Current ACEA C5 specification
- MAXIMUM wear protection, minimum sludge formation reduced piston deposits and maximised fuel economy.
- LONG engine oil drain intervals
- EXTENDED exhaust catalyst and oxygen sensor life
- Based on Sequence VG sludge test results using 0W-40
- Compared with API SN specification, tests carried out at an independent laboratory
5W‐30
API SL/CF; ACEA A3/B3, A3/B4
MULTI GRADE OIL FOR DIESEL AND GASOLINE ENGINES
Specifications
- Unsurpassed sludge protection – motor oil that can keep your engine closer to factory clean
- Low viscosity and low friction characteristics for up to 2.2% greater fuel economy
- No loss of engine power or fuel economy even after 100,000 km 3 3 Compared with higher-viscosity oils
- Easier cold starting
For gasoline, diesel and gas engines; also suitable for biodiesel and gasoline/ethanol blends
- Based on Sequence VG sludge test results using 0W-40
- Compared with API SN specification, tests carried out at an independent laboratory
10W‐30
API SN; ILSAC GF-5
FOR GASOLINE ENGINES
Specifications
- Unsurpassed wear and sludge protection
- Leaves pistons 65% cleaner than the industry standard
- Enhanced fuel economy, with a corresponding reduction in emissions
- Based on Sequence IVA wear test and Sequence VG sludge test using 5W-30
- Based on Sequence VID fuel economy test compared with the industry reference oil
Other packing size could be available upon request.
Packing Size : NA | NA | NA | NA
Other grades of lubricants can be blended as per customer request. These typical results are of existing production, the future production will conform to our blending specifications hence any variation in these results will not affect the product performance.
10W‐60
SN/CF; ACEA A3/B3, A3/B4
MULTI GRADE OIL FOR DIESEL AND GASOLINE ENGINES
Specifications
- Unsurpassed sludge protection – motor oil that can keep your engine closer to factory clean
- Provides exceptional bearing protection under extreme-performance and racing conditions
- Superior wear and corrosion protection
- Compared with API SN specification
- Developed in association with Ferrari for racing and modified engines
- Based on Sequence VG sludge test results using 0W-40.
- Compared with lower viscosity oils.
- Tests carried out at an independent laboratory.
Starck Oil
Premium
(SEMI SYNTHETIC MOTOR OILS)
FORTE TURBO STARCK PREMIUM semi-synthetic or synthetic technology oils make use of both synthetic and mineral base stocks to achieve higher performance levels that is formulated from mineral oils alone.
Semi synthetic motor oils help protect your engine.
FORTE TURBO STARCK PREMIUM synthetic technology motor oils go on cleansing and protection to help keep your engine feeling like new, consuming less oil leading to lower frequency of top up. FORTE TURBO STARCK PREMIUM synthetic technology formulation with Forte Protection offers maximum protection in very hot and extremely cold climates, and severe driving conditions.
5W‐40
API SN/CF; ACEA A3/B3, A3/B4; JASO SG+
MULTI GRADE OIL FOR DIESEL AND GASOLINE ENGINES
Specifications
- Makes use of both synthetic and mineral base stocks to achieve
higher performance levels than can be formulated from mineral oils alone - Helps to extend engine life by protecting against wear, even in daily traffic conditions
- For gasoline, diesel and gas engines; also suitable for biodiesel and gasoline/ethanol blends
5W‐30
API SL/CF; ACEA A3/B3, A3/B4; JASO SG+
MULTI GRADE OIL FOR DIESEL AND GASOLINE ENGINES
Specifications
- Makes use of both synthetic and mineral base stocks to achieve
higher performance levels than can be formulated from mineral oils alone - Helps to extend engine life by protecting against wear, even in daily traffic conditions
- Low viscosity and low friction characteristics for enhanced fuel economy
- For gasoline, diesel and gas engines; also suitable for biodiesel and gasoline/ethanol blends
10W‐30
API CF; ACEA A3/B3, A3/B4
FOR DIESEL ENGINES
Specifications
- Makes use of both synthetic and mineral base stocks to achieve
higher performance levels than can be formulated from mineral oils alone - Actively locks away harmful performance-robbing deposits
- Helps to extend engine life by protecting against wear, even in daily traffic conditions
10W‐40
API SN/CF; ACEA A3/B3, A3/B4; JASO SG+
MULTI GRADE OIL FOR DIESEL AND GASOLINE ENGINES
Specifications
- Makes use of both synthetic and mineral base stocks to achieve higher performance levels than can be formulated from mineral oils alone
- Helps to extend engine life by protecting against wear, even in daily traffic conditions
- For gasoline, diesel and gas engines; also suitable for biodiesel and gasoline/ethanol blends
15W‐40
API SN/CF; ACEA A3/B3, A3/B4; JASO SG+
MULTI GRADE OIL FOR DIESEL AND GASOLINE ENGINES
Specifications
- Synthetic technology motor oil – Long-term protection against sludge.
- Provides sludge protection with synthetic technology and mineral oil
- Helps to extend engine life by providing wear protection
Other packing size could be available upon request.
Packing Size : NA | NA | NA | NA
Other grades of lubricants can be blended as per customer request. These typical results are of existing production, the future production will conform to our blending specifications hence any variation in these results will not affect the product performance.
Starck Oil
Royal Blend
(MULTI GRADE MINERAL OIL FOR DIESEL AND GASOLINE ENGINES)
FORTE TURBO STARCK ROYAL BLEND Mineral Engine oil is the fraction of organically occurring crude oil with the right properties for lubricating engines. FORTE TURBO STARCK ROYAL BLEND mineral motor oils protect your engine against harmful sludge and keep engines clean.
Forte Turbo Lubricants bring top class high tech insights to its products, offering you the best formulations for your vehicle.
FORTE TURBO STARCK ROYAL BLEND is designed for light duty trucks, heavy duty trucks and heavy-duty engines.
With Forte Protection, it protects against engine wear and tear caused by each start and stop throughout your day. The high performance additive contains anti-corrosion components for a longer oil life in vehicles operating under high idle engine conditions. Dispersants in the additive package help break down the soot and deposits built-up irrespective of the type of load carried.
15W-40
API SN/CF, A3/B3
MULTI GRADE OIL FOR DIESEL AND GASOLINE ENGINES
Specifications
- Helps to protect against wear and neutralise corrosive combustion acids
- High total base number (TBN) to help combat corrosion and help to prevent engine damage and prolong engine life
- For gasoline, diesel and gas engines; also suitable for biodiesel and gasoline/ethanol blends.
15W‐40
API CH4
MULTI GRADE OIL FOR DIESEL AND GASOLINE ENGINES
Specifications
- Helps to protect against the build-up of piston deposits for continuing engine efficiency
- Exceeds performance limits in piston ring, cylinder liner and valve train wear tests for long engine life
- Helps to maintain performance in diesel engines
15W‐40
API CI-4, ACEA E7
FOR GASOLINE ENGINES
Specifications
- Premium multigrade motor oil – Helps to maintain performance in diesel engines.
- Over 50% more cleanliness control through reduced engine sludge
- Provides up to 50% more protection by helping to neutralise acids and to prevent corrosion
20W-50
API SN
MULTI GRADE OIL FOR GASOLINE ENGINES
Specifications
- Helps to prevent engine sludge build-up
- Helps to extend engine life by providing wear protection
SAE-50
API SL/CF
MONOGRADE MOTOR OIL
Specifications
- Monograde motor oil – Reliable protection for older engines.
- Helps to protect against harmful sludge and varnish deposits
80W-90
API GL-5, API MT-1, API PG-2
PREMIUM MINERAL HEAVY DUTY GEAR OIL
Specifications
- Maximum protection
- High thermal stability for heavy duty usage
- Maintains cleanliness and reduces abrasive wear of critical parts
- Longer drain intervals by resisting high temperature degradation
- Superior protection against scoring and spalling wear
- Compatible with copper alloy components and protects against corrosion.
Other packing size could be available upon request.
Packing Size : NA | NA | NA | NA
Other grades of lubricants can be blended as per customer request. These typical results are of existing production, the future production will conform to our blending specifications hence any variation in these results will not affect the product performance.
80W-140
API GL-5, API MT-1. API PG-2
Premium Mineral Heavy Duty Gear Oil
Specifications
- Maximum protection
- High thermal stability for heavy duty usage
- Maintains cleanliness and reduces abrasive wear of critical parts
- Longer drain intervals by resisting high temperature degradation
- Superior protection against scouring and spalling wear
- Compatible with copper alloy components and protects against corrosion
